Product Name: friction smart card connector (with outgoing line)

Product model: kz-b09b

Detailed description: 62 * 40 * 7mm

According to the general specification of IC card socket, SJ / t11166-1998

There is spring contact protection design in the card holder to prevent abnormal card insertion and wire damage to the spring

There is a dustproof protection door, this design has won the national patent

Customers can choose the line length, definition and joint mode according to the demand;

Scope of application

Water, electricity, gas meter, card reader, IC card lock, IC card telephone, access control, etc

Network optimization information:

How to distinguish between contactless and contactless IC card holders? Here is a brief introduction of these knowledge, I hope to help you. Before processing, the contactless card and the reader should be mutually authenticated for three times, and all data should be encrypted in the process of communication. In addition, each sector of the card has its own operating password and access conditions. The storage structure of contactless card makes it suitable for different systems. Users can set different passwords and access conditions according to different applications.

The contactless IC card holder is composed of smart card connector chip and induction antenna. The contactless IC card holder is completely sealed in the standard PVC card without exposed part. In the reading and writing process of contactless IC Card Cardholder, the reading and writing operation is usually completed by the radio wave between the contactless IC Card Cardholder and the card reader.

Contactless IC Card Cardholder is a passive body. When the reader writes to the card, the signal sent by the reader consists of two parts: one is the power signal, which resonates with its own L / C after being received by the card, generating instantaneous energy to provide work for the chip. The other part is the command chip to complete data, modification, storage and so on. And return it to the reader. The read-write system composed of contactless IC card holders has been greatly simplified in hardware structure and operation process. At the same time, with the help of advanced management software and offline operation mode, the data reading and writing process is more simple.